Chrysler Front Wheel Drive Cars 6-CYL 1988-1995 Repair Information

Rear Window Washer Motor

Print

REMOVAL & INSTALLATION



  1. Remove the washer reservoir and pump assembly.
  2.  
  3. With what Chrysler refers to as "mechanical fingers'' (a pair of long needle nose pliers or another suitable tool should work), loosen the pump filter and nut through the liquid filler opening.
  4.  
  5. Disconnect the outside portion of the pump.
  6.  
  7. Remove the inner and outer portions of the pump, then remove the pump from the reservoir.
  8.  

To install:
  1. Install a new rubber grommet into place in the bottom of the reservoir.
  2.  
  3. Position the pump in place, then install the nut through the filler opening and tighten it with the same tool used to loosen it.
  4.  
  5. Install the reservoir and pump assembly.
  6.  

 
label.common.footer.alt.autozoneLogo