Chrysler Front Wheel Drive Cars 6-CYL 1988-1995 Repair Information

Rear Window Washer Reservoir

Print

REMOVAL & INSTALLATION



  1. Unlock and open the rear liftgate.
  2.  
  3. Remove the right-rear quarter panel inside trim as needed to gain access to the reservoir.
  4.  
  5. Remove the 2 reservoir mounting screws.
  6.  
  7. Disconnect the wiring harness and filler tube from the reservoir and pump assembly.
  8.  
  9. Disconnect the washer hose and block the pump outlet to prevent the liquid from running out.
  10.  
  11. Remove the reservoir and pump assembly from the rear quarter panel.
  12.  

To install:
  1. Position the reservoir and pump assembly into the right rear quarter panel.
  2.  
  3. Connect the washer hose, wire harness and filler tube to the reservoir and pump assembly.
  4.  
  5. Install the 2 reservoir mounting screws.
  6.  
  7. Install the inner trim panels.
  8.  
  9. Close the rear liftgate.
  10.  

 
label.common.footer.alt.autozoneLogo