Chrysler Full-Size Trucks 1967-1988 Repair Guide

Roof Vent

Print

REMOVAL & INSTALLATION



See Figure 1

Roof Vent
  1. Open the cover, then drill the upper rivet head from the cover/handle assembly.
  2.  
  3. Remove the vent cover hinge. Remove the cover.
  4.  

To install:
  1. Install the cover, then attach the hinge.
  2.  



Click image to see an enlarged view

Fig. Fig. 1: Roof vent assembly for Ramchargers

  1. Install the handle to the cover using a 2.125x187 inch rivet or equivalent.
  2.  

Vent Cover Seal
  1. Open the cover, then remove the cover hinge.
  2.  
  3. Remove the cover seal from the frame.
  4.  
  5. Clean the seal area of the frame well.
  6.  

To install:
  1. Using a weatherstip cement, install the seal.
  2.  
  3. Install the cover hinge, then water test the vent.
  4.  

 
label.common.footer.alt.autozoneLogo