Chrysler Full-Size Trucks 1967-1988 Repair Guide

Snow Plow Toggle Switch

Print

REMOVAL & INSTALLATION



  1. Remove the four screws holding the bezel to the housing.
  2.  
  3. Pull rearwards, disconnect the wire from the toggle switch.
  4.  
  5. Remove the toggle switch by unscrewing the nut from the front of the bezel.
  6.  

To install:
  1. Position the toggle switch into the bezel and install the nut.
  2.  
  3. Connect the wires to the switch.
  4.  
  5. Install the bezel to the instrument panel and install the four mounting screws.
  6.  

 
label.common.footer.alt.autozoneLogo