Chrysler Full-Size Trucks 1967-1988 Repair Guide

Inside Rear View Mirror



See Figure 1

The mirror is held in place on a backing with a single setscrew. Though the mirror is easily removed or installed from the backing, the same cannot be said for the backing and glass. Should be backing come loose, you should purchase a mirror backing adhesive repair kit and follow its instructions.

  1. Loosen the screw and lift the mirror off the button.

To install:
  1. Slide the mirror over the button, then carefully tighten the set screw.

Do not overtighten the screw; it will strip and you will run into problems. Repair kits for damaged mirrors are available at many auto parts stores.

Click image to see an enlarged view

Fig. Fig. 1: Rearview mirror