Chrysler Full-Size Trucks 1967-1988 Repair Guide

Windshield Wiper Blade

Print

REMOVAL & INSTALLATION



See Figure 1

If new wiper inserts (refills) are to be installed, it is a good practice to thoroughly clean the windshield first. You can use grade 000 steel wool with soap and water. Grade 000 steel wool is soft enough to not scratch the surface of the windshield, and will remove all traces of oils and chemicals which land on your windshield on a daily basis.

  1. Lift the arm to raise the blade.
  2.  
  3. Lift the release tab on the center of the pivot and remove the blade assembly.
  4.  

To install:
  1. Clip the wiper blade assembly into the wiper arm and make sure it is secure.
  2.  
  3. Lower the arm.
  4.  



Click image to see an enlarged view

Fig. Fig. 1: Remove the wiper blade and refill assembly

 
label.common.footer.alt.autozoneLogo