Chrysler Full-Size Trucks 1989-1996 Repair Guide

Control Head

Print

REMOVAL & INSTALLATION



See Figures 1, 2 and 3

  1. Remove the face plate.
  2.  
  3. Remove the control attaching screws.
  4.  
  5. Pull the control rearward.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: Details of a common manual A/C control head

  1. On models with air conditioning, perform the following:
    1. Disconnect the blower switch wiring.
    2.  
    3. Disconnect the pushbutton switch wiring.
    4.  

  2.  
  3. Disconnect the panel light.
  4.  



Click image to see an enlarged view

Fig. Fig. 2: Remove the bezel, then the screws to access the heater/air conditioning control head-1994-96 models shown



Click image to see an enlarged view

Fig. Fig. 3: Disconnect the vacuum lines from the rear of the control head-1994-96 models shown

  1. On models with air conditioning, disconnect the vacuum harness.
  2.  
  3. Disconnect the control cable(s).
  4.  
  5. Remove the unit.
  6.  
  7. Installation is the reverse of removal. Adjust the cables.
  8.  

 
label.common.footer.alt.autozoneLogo