Chrysler Full-Size Trucks 1989-1996 Repair Guide

Manual Door Locks

Print

REMOVAL & INSTALLATION



Front Door Latch

See Figure 1

  1. Raise the glass to the full UP position.
  2.  
  3. Remove the door trim panel and watershield.
  4.  



Click image to see an enlarged view

Fig. Fig. 1: Exploded view of a common door handle mounting

  1. Disconnect the clips and/or rods from the handle and lock cylinder, and from the remote control assembly.
  2.  
  3. Remove the latch assembly attaching screws and remove the latch from the door.
  4.  
  5. Install in the reverse order of removal.
  6.  

Rear Door Latch

This procedure applies only to Crew Cab models.

  1. Raise the glass to the full UP position.
  2.  
  3. Remove the door trim panel and watershield.
  4.  
  5. Disconnect the rods from the handle and lock cylinder, and from the remote control assembly.
  6.  
  7. Remove the latch assembly attaching screws and remove the latch from the door.
  8.  
  9. Install in the reverse order of removal.
  10.  

Door Lock Cylinder

See Figures 2 and 3

  1. Place the window in the UP position.
  2.  
  3. Remove the trim panel and watershield.
  4.  
  5. Disconnect the actuating rod from the lock control link clip.
  6.  



Click image to see an enlarged view

Fig. Fig. 2: A common door link attachment to the latch

  1. Slide the retainer away from the lock cylinder.
  2.  



Click image to see an enlarged view

Fig. Fig. 3: Exploded view of a common door lock cylinder assembly

  1. Pull the cylinder from the door.
  2.  
  3. Install in reverse order of removal.
  4.  

 
label.common.footer.alt.autozoneLogo