Chrysler Full-Size Trucks 1989-1996 Repair Guide

Power Door Lock Actuator

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Raise the glass to the full UP position.
  2.  
  3. Remove the door trim panel.
  4.  
  5. Disconnect the motor from the door latch.
  6.  
  7. Remove the motor and swivel bracket from the door by drilling out the pop rivet, or removing the retaining screws.
  8.  



Click image to see an enlarged view

Fig. Fig. 1: Details of a common power door lock and actuator assembly

  1. Disconnect the wiring harness.
  2.  
  3. Installation is the reverse of removal.
  4.  

 
label.common.footer.alt.autozoneLogo