REMOVAL & INSTALLATION
See Figure 1
- Remove the seat track-to-floor pan bolts and lift the seat and track out of the truck.
- Installation is the reverse of removal. Apply sealer to the area of the bolt holes. Tighten the bolts to 30 ft. lbs. (41 Nm).
The side-facing seats are held in place with 2 bolts. The forward facing seat is held down with 4 bolts. When replacing the seat, use sealer in the bolt hole areas. Tighten the bolts to 30 ft. lbs. (41 Nm)RAMCHARGER
To remove the folding rear seat, fold down the seat back and unlatch the seat from the floor. Fold the seat forward and remove the seat track-to-floor bolts. Tighten the bolts to 60 ft. lbs. (81 Nm).