Chrysler Full-Size Trucks 1989-1996 Repair Guide

Rear Turn Signal, Brake and Parking Lights

Print

REMOVAL & INSTALLATION



See Figures 1, 2, 3 and 4

  1. Remove the lens screws.
  2.  



Click image to see an enlarged view

Fig. Fig. 1: Unscrew the tail light lens in order to remove it from the body



Click image to see an enlarged view

Fig. Fig. 2: Pull the lens free of the truck

  1. Pull off the lens, turn the bulb and pull it out of its socket.
  2.  



Click image to see an enlarged view

Fig. Fig. 3: Pull the bulb socket and wiring out from behind the particular lamp you are servicing

  1. Place the bulb into the socket and turn it to secure the mounting lugs. Install and secure the lens.
  2.  



Click image to see an enlarged view

Fig. Fig. 4: Depress the bulb and twist it 1/8 turn counterclockwise to disengage it from the socket

 
label.common.footer.alt.autozoneLogo