Chrysler Full-Size Trucks 1989-1996 Repair Guide

RWAL Control Module

Print

REMOVAL & INSTALLATION



See Figures 1, 2 and 3

  1. Remove the passenger side sill plate and cowl cover.
  2.  
  3. Remove the screws attaching the control module to the cowl side.
  4.  



Click image to see an enlarged view

Fig. Fig. 1: Exploded view of the RWAL electronic control module wiring connectors-Dakota models

  1. Make sure the ignition is OFF , then disconnect the control module connector and remove the control module from the vehicle.
  2.  



Click image to see an enlarged view

Fig. Fig. 2: RWAL underhood connector locations-Dakota models



Click image to see an enlarged view

Fig. Fig. 3: RWAL control module connector pin numbers

  1. Install in reverse order.
  2.  

 
label.common.footer.alt.autozoneLogo