Chrysler Full-Size Trucks 1989-1996 Repair Guide

Windshield Wiper Blade and Arm

Print

REMOVAL & INSTALLATION



See Figures 1 and 2

To remove the arm from the pivot, lift the arm to permit the latch to be pulled out to the holding position and remove the arm from the pivot with a rocking motion.



Click image to see an enlarged view

Fig. Fig. 1: Mount the wiper blade/arm as shown-Dakota models



Click image to see an enlarged view

Fig. Fig. 2: Mount the wiper blade/arm as shown-1994-96 Pick-ups

When installing the arms, the at-rest position of the blades should be determined before pushing the arm onto the pivot. For Dakota trucks, the tip of the driver's side blade should be 0.51-2.63 in. (13-67mm) above the cowl panel and the passenger's side blade should be 0.94-3.06 in. (24-78mm) above the cowl panel. For 1989-93 Pick-ups and Ramchargers, the driver's side blade should be 1.84 in. (47mm) above the windshield weatherstripping at the heel of the blade; the passenger's side blade should be 2.24 in. (57mm) above the weatherstripping. For 1994-96 Pick-ups, the wiper motor must be in the PARK position and the wiper blade should be about 0.85 in. (22mm) from the upper edge of the black-out areas at the base of the windshield.

 
label.common.footer.alt.autozoneLogo