Chrysler Full-Size Trucks 1989-1996 Repair Guide

Wiper Linkage

Print

REMOVAL & INSTALLATION



See Figure 1

Left Pivot and Drive Link
  1. Remove the wiper arms.
  2.  
  3. Remove the cowl assembly.
  4.  
  5. If applicable, remove the attached cover to the access hole, then reach through the access hole and remove the drive link from the right pivot by prying the retaining bushing from the pivot pin.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: Exploded view of the wiper motor and linkage-Pick-up and Ramcharger

  1. Remove the crank arm from the drive link by prying the retaining bushing from the crank arm pin.
  2.  
  3. Remove the left pivot mounting screws and let the pivot hang loosely.
  4.  
  5. Remove the drive link and left pivot through the access holes.
  6.  
  7. Remove the drive link from the left pivot by prying the retaining bushing from the pivot pin.
  8.  
  9. Installation is the reverse of removal. Tighten the pivot mounting screws to 95 inch lbs. (11 Nm).
  10.  

Right Pivot

  1. Remove the wiper arms.
  2.  
  3. Remove the cowl assembly.
  4.  
  5. Reach through the access hole and remove the drive link from the right pivot by prying the retaining bushing from the pivot pin.
  6.  
  7. Remove the right pivot mounting screws.
  8.  
  9. Remove the pivot through the access hole.
  10.  
  11. Installation is the reverse of removal. Tighten the pivot screws to 95 inch lbs. (1 Nm).
  12.  

 
label.common.footer.alt.autozoneLogo