Chrysler Full-Size Trucks 1997-2000 Repair Guide

General Information


The 4.7L V-8 engine uses an advanced distributorless ignition system. A dedicated ignition coil is mounted above each spark plug and bolted to the engine. No plug wires are employed.

The main components of the ignition system are:

Powertrain control module (PCM)
Ignition coils
Spark plugs
Crankshaft and camshaft position sensors.

The PCM automatically regulates the spark advance to fire the spark plugs according to input from various engine sensors. The input signals are then used to compute the optimum ignition timing for the lowest exhaust emissions and best driveability. During the crank-start period, ignition timing advance is set to ensure quick and efficient starting.

The amount of electronic spark advance provided is determined by four input factors: coolant temperature, engine rpm, throttle position and available manifold vacuum. On some late model systems, intake manifold temperature is also used. Gear selection may also be a factor.

Battery voltage is supplied to each coil by the Automatic Shutdown (ASD) relay. The PCM opens and closes each coil's ground circuit at a specific time to fire the plug.

By controlling the coil ground circuit, the PCM is able to set the base timing and adjust the ignition timing advance. This is done to meet changing engine conditions.

Base ignition timing is set by the PCM and is not adjustable.

Click image to see an enlarged view

Fig. Ignition coil components on the 4.7L engine. Primary winding resistance is measured at the electrical connector terminals