Chrysler Full-Size Trucks 1997-2000 Repair Guide

Fog Lamp Switch

Print

REMOVAL & INSTALLATION



  1. Disconnect the battery negative cable(s).
  2.  
  3. Remove the cluster bezel.
  4.  
  5. On some models the switch is attached to the cluster bezel. If so, squeeze the lock tabs on the switch and disconnect it from the panel. If not, proceed to the next step.
  6.  
  7. Remove the three screws that secure the switch mounting plate to the instrument panel.
  8.  
  9. Pull out the switch and disconnect the wires.
  10.  
  11. Squeeze the tabs on the back of the switch and remove it from the mounting plate.
  12.  
  13. Installation is the reverse of removal.
  14.  



Click image to see an enlarged view

Fig. Fog lamp switch mounting assembly-typical

 
label.common.footer.alt.autozoneLogo