Chrysler Full-Size Trucks 1997-2000 Repair Guide

RWAL Valve

Print

REMOVAL & INSTALLATION



  1. Remove the RWAL valve harness connector from the controller.
  2.  
  3. Remove the brake lines from the valve.
  4.  
  5. Remove the valve mounting bolt and remove the valve from the bracket.
  6.  
  7. Installation is the reverse of removal. Tighten the mounting bolt to 15-20 ft. lbs. (20-27 Nm). Tighten the brake line fittings to 14 ft. lbs. (19 Nm).
  8.  



Click image to see an enlarged view

Fig. RWAL valve, mounting bolt and brake lines-typical

 
label.common.footer.alt.autozoneLogo