Chrysler Full-Size Trucks 1997-2000 Repair Guide

Rear Output Shaft Seal

Print

REMOVAL & INSTALLATION



  1. Raise and safely support the vehicle securely on jackstands.
  2.  
  3. Remove the rear driveshaft.
  4.  
  5. Place a drip pan beneath the transfer case.
  6.  
  7. Pry out the rear seal.
  8.  
  9. If the seal cannot be removed, the rear extension can be taken off and the seal can be punched out.
  10.  
  11. Grease the lips of the new seal and drive it straight in.
  12.  



Click image to see an enlarged view

Fig. Transfer case rear extension removal

 
label.common.footer.alt.autozoneLogo