Chrysler Full-Size Vans 1967-1988 Repair Guide

Ignition Coil

Print

REMOVAL & INSTALLATION



See Figure 1

Click image to see an enlarged view

Fig. Fig. 1: View of the coil connections

  1. Disconnect the battery ground.
  2.  
  3. Disconnect the two small and one large wires from the coil.
  4.  
  5. Disconnect the condenser connector from the coil, if equipped.
  6.  
  7. Unbolt and remove the coil.
  8.  
  9. Installation is the reverse of removal.
  10.  

 
label.common.footer.alt.autozoneLogo