Chrysler Full-Size Vans 1967-1988 Repair Guide

Front Cover Seal

Print

REMOVAL & INSTALLATION



See Figures 1 and 2

Click image to see an enlarged view

Fig. Fig. 1: Removing the front seal on the 238, 318 and 360 engines-cover installed



Click image to see an enlarged view

Fig. Fig. 2: Installing a new front seal on the 238, 318 and 360 engines-cover installed

A seal remover and installer tool is required to prevent seal damage.

  1. Using a seal puller, separate the seal from the retainer.
  2.  
  3. Pull the seal from the case.
  4.  

To install:
  1. To install the seal place it face down in the case with the seal lips downward.
  2.  
  3. Seat the seal tightly against the cover face. There should be a maximum clearance of 0.0014" between the seal and the cover. Be careful not to over-compress the seal.
  4.  

 
label.common.footer.alt.autozoneLogo