Chrysler Full-Size Vans 1967-1988 Repair Guide

Exterior Hood

Print

REMOVAL & INSTALLATION



See Figure 1

Click image to see an enlarged view

Fig. Fig. 1: Common front hood assembly and related components

  1. Open and prop up the hood.
  2.  
  3. Remove the bolts from each hinge and lift off the hood.
  4.  
  5. Installation is the reverse of removal.
  6.  

ALIGNMENT



The hood can be adjusted fore-aft and up-and-down to obtain a proper fit.

  1. Loosen the hood-to-hinge bolts until they are finger-tight.
  2.  
  3. Reposition the hood as required.
  4.  
  5. Tighten the bolts.
  6.  

 
label.common.footer.alt.autozoneLogo