Chrysler Full-Size Vans 1967-1988 Repair Guide

Headlight Switch

Print

REMOVAL & INSTALLATION



1967-72 Models

See Figure 1

Click image to see an enlarged view

Fig. Fig. 1: Headlight switch mounting for 1977 and earlier vehicles

  1. Disconnect the battery ground cable.
  2.  
  3. Pull the knob from the switch.
  4.  
  5. Remove the switch retaining nut.
  6.  
  7. Lower the switch and disconnect the wiring.
  8.  
  9. Installation is the reverse of removal.
  10.  

1973-77 Models
  1. Remove the cluster screws and pull the cluster out far enough to access the wiper switch.
  2.  
  3. Unplug the wiring harness from the switch.
  4.  
  5. Depress the locking button on the bottom of the switch and pull the knob and shaft from the switch.
  6.  
  7. Remove the retaining nut from the switch.
  8.  
  9. Remove the switch.
  10.  

1978-88 Models

See Figure 2

Click image to see an enlarged view

Fig. Fig. 2: Headlight switch mounting for 1978 and later vehicles

  1. Disconnect the battery ground cable.
  2.  
  3. Working under the instrument panel, depress the locking buttom on the switch and pull the knob and stem from the switch.
  4.  
  5. Remove the instrument panel hood and bezel.
  6.  
  7. Remove the switch bezel mounting screws.
  8.  
  9. Remove the switch mounting nut, remove the switch and disconnect the wiring.
  10.  
  11. Installation is the reverse of removal.
  12.  

 
label.common.footer.alt.autozoneLogo