Chrysler Full-Size Vans 1967-1988 Repair Guide

Windshield Wiper Switch

Print

REMOVAL & INSTALLATION



See Figures 1 and 2

Click image to see an enlarged view

Fig. Fig. 1: Early model windshield wiper/washer switch



Click image to see an enlarged view

Fig. Fig. 2: Late model windshield wiper/washer switch

1967-72 Models

  1. Disconnect the battery ground cable.
  2.  
  3. Pull the knob from the switch.
  4.  
  5. Remove the switch retaining nut.
  6.  
  7. Lower the switch and disconnect the wiring.
  8.  
  9. Installation is the reverse of removal.
  10.  

1973-77 Models

  1. Remove the cluster screws and pull the cluster out far enough to access the wiper switch.
  2.  
  3. Loosen the setscrew on the switch knob and pull off the knob.
  4.  
  5. Unplug the wiring harness from the switch.
  6.  
  7. Remove the retaining nut and clip from the switch.
  8.  
  9. Remove the switch.
  10.  

1978-84 Models

  1. Remove the 2 mounting screws from under the instrument panel.
  2.  
  3. Unplug the wiring from the switch.
  4.  
  5. Disconnect the switch lamp.
  6.  
  7. Pull the switch out from under the panel.
  8.  
  9. Installation is the reverse of removal.
  10.  

1985-86 Models

  1. Remove the steering column cover.
  2.  
  3. Remove the 2 mounting screws from under the instrument panel.
  4.  
  5. Unplug the wiring from the switch.
  6.  
  7. Disconnect the switch lamp.
  8.  
  9. Pull the switch out from under the panel.
  10.  
  11. Installation is the reverse of removal.
  12.  

1987-88 Models

The wiper switch is incorporated into the turn signal switch stalk. For switch removal and installation, see Suspension & Steering .

 
label.common.footer.alt.autozoneLogo