REMOVAL & INSTALLATION
To remove the cover, raise it, unbolt the support and remove the retaining pins from the hinges.
Depending on the option level of the vehicle, it may be necessary to remove some accessories that are fastened to the engine cover before it can be removed.
To remove the cover, pull the floor covering back to expose the two hold-down bolts or latches. Remove the bolts and/or unhook the latches. There are two latches, located on either side of the cover (near the top), which must also be unhooked. Once the cover is loose, slide it rearward, then lift it up and pull it back. Remove the cover from the vehicle.