Chrysler Full-Size Vans 1967-1988 Repair Guide

Manual Door Glass and Regulator

Print

REMOVAL & INSTALLATION



  1. Remove the access or trim panel and watershield.
  2.  
  3. Lower the glass all the way.
  4.  
  5. Remove the lower vent window support bolt.
  6.  
  7. Locate the vent window retaining clip screw through the weatherstripping and remove the screw.
  8.  
  9. Lower the door glass and tilt the vent window assembly rearward.
  10.  
  11. Remove the vent window.
  12.  
  13. Slide the door glass forward to disconnect it from the regulator.
  14.  
  15. Remove the inside weatherstripping from the glass opening.
  16.  
  17. Lift the glass from the door.
  18.  
  19. Unbolt and remove the regulator. Later models have the regulator secured with rivets. Drill these out.
  20.  
  21. Install the regulator. On later models, replace the rivets with 1 / 4 -20X 1 / 2 inch bolts and nuts.
  22.  

 
label.common.footer.alt.autozoneLogo