Chrysler Full-Size Vans 1967-1988 Repair Guide

Power Door Locks

Print

REMOVAL & INSTALLATION



See Figure 1

Click image to see an enlarged view

Fig. Fig. 1: Front door lock and latch assemblies-power locks shown, manual is similar

Lock Solenoid

  1. Raise the glass to the full UP position.
  2.  
  3. Remove the door trim panel.
  4.  
  5. Unplug the wiring from the solenoid.
  6.  
  7. Disconnect the linkage from the solenoid.
  8.  
  9. Remove the mounting screws and lift out the solenoid.
  10.  
  11. Installation is the reverse of removal.
  12.  

 
label.common.footer.alt.autozoneLogo