Chrysler Full-Size Vans 1967-1988 Repair Guide

Rear Turn Signal, Brake and Parking Lights

Print

REMOVAL & INSTALLATION



See Figures 1, 2 and 3

Click image to see an enlarged view

Fig. Fig. 1: To replace the rear signal/marker bulbs, remove the lens retaining screws ...



Click image to see an enlarged view

Fig. Fig. 2: ... then remove the lens



Click image to see an enlarged view

Fig. Fig. 3: Push in and turn the bulb to remove it from the housing

  1. Remove the lens screws.
  2.  
  3. Pull off the lens, turn the bulb and pull it out of its socket.
  4.  
  5. Installation is the reverse of removal.
  6.  

 
label.common.footer.alt.autozoneLogo