Chrysler Full-Size Vans 1967-1988 Repair Guide

Back-Up Light Switch

Print

REMOVAL & INSTALLATION



NP-2500

See Figure 1

Click image to see an enlarged view

Fig. Fig. 1: Back-up light switch location and related components on the NP-2500 transmission

The switch is located on the left side of the transmission just below and behind the shifter. It screws into place. Tighten it to 15 ft. lbs.

Overdrive-4

See Figure 2

Click image to see an enlarged view

Fig. Fig. 2: Back-up light switch location and related components on the Overdrive-4 (A-833) transmission

The switch is located on the left side of the case, just behind the shift linkage housing. It screws into place. Tighten it to 15 ft. lbs.

A-230, A-250

The switch is located in the left case, just below the shifters. It screws into place. Tighten it to 15 ft. lbs.

A-390

The switch is located on the left side of the extension housing at the case end. It screws into place. Tighten it to 15 ft. lbs.

A-745, A-903

The switch is located on the left side of the case, just behind the shift linkage housing. It screws into place. Tighten it to 15 ft. lbs.

 
label.common.footer.alt.autozoneLogo