Chrysler Full-Size Vans 1967-1988 Repair Guide

Fuel System Pressure Release

Print

  1. Loosen the gas cap to release tank pressure.
  2.  
  3. Remove the wiring harness connector from the injector.
  4.  
  5. Ground one terminal of the injector.
  6.  
  7. Connect a jumper wire to the second terminal and touch the battery positive post for no longer than ten seconds. This releases system pressure.
  8.  
  9. Remove the jumper wire and continue fuel system service.
  10.  

 
label.common.footer.alt.autozoneLogo