Chrysler Full-Size Vans 1967-1988 Repair Guide

Throttle Position Sensor

Print

REMOVAL & INSTALLATION



See Figure 1

Click image to see an enlarged view

Fig. Fig. 1: Throttle position sensor mounting

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the air cleaner.
  4.  
  5. Disconnect the three way connector at the throttle position sensor.
  6.  
  7. Remove the two screws mounting the throttle position sensor to the throttle body.
  8.  
  9. Lift the throttle position sensor off the throttle shaft.
  10.  

To install:
  1. Install the throttle position sensor on the throttle body. Position the connector toward the rear of vehicle.
  2.  
  3. Connect the three way connector at the throttle position sensor.
  4.  
  5. Install the air cleaner.
  6.  
  7. Connect the negative battery cable.
  8.  
  9. Check operation with sensor read test #5.
  10.  

 
label.common.footer.alt.autozoneLogo