Chrysler Full-Size Vans 1989-1998 Repair Guide

Fuses

Print

See Figures 1, 2 and 3

The fuse block is located under the glove box door. Most models use blade-type fuses, but some earlier models may use glass tubular type fuses. Be sure to always try to determine the cause of a blown fuse before replacing, and visually check the protected circuit before replacing the fuse. If no problem was found during the visual inspection, replace the fuse. If it blows again, a short exists in the system; repair the short before replacing the fuse.

Some models have a power distribution box located in the engine compartment. The box is located adjacent to the battery and contains additional fuses for circuits such as the Anti-lock Braking System (ABS), trailer towing, alternator, A/C compressor, and other circuits.



Click image to see an enlarged view

Fig. Fig. 1: The interior fuse block is located alongside the glove box on most models



Click image to see an enlarged view

Fig. Fig. 2: The fuse block is located beneath the black cover, which is behind the glove box door



Click image to see an enlarged view

Fig. Fig. 3: The power distribution box is located next to the battery

REPLACEMENT



Interior Fuse Block
  1. Open the glove box door.
  2.  
  3. Lift the fuse block cover.
  4.  
  5. Remove the appropriate fuse from the fuse block, noting its location for installation.
  6.  

To install:
  1. Install the proper type and rated fuse into location.
  2.  
  3. Close the fuse block cover.
  4.  
  5. Close the glove box door.
  6.  

Power Distribution Box
  1. Open the hood.
  2.  
  3. Remove the power distribution box cover.
  4.  
  5. Remove the appropriate fuse from the power distribution box, noting its location for installation.
  6.  

To install:
  1. Install the proper type and rated fuse into location.
  2.  
  3. Install the cover on the power distribution box.
  4.  
  5. Close the hood.
  6.  

 
label.common.footer.alt.autozoneLogo