REMOVAL & INSTALLATION
See Figures 1, 2, 3, 4, 5, 6 and 7
Fig. Fig. 1: On early model vehicles, the headlamp bezel must be removed prior to removing the grille
Fig. Fig. 2: A long screwdriver must be used to reach the grille retaining screws, especially toward the center of the grille
Fig. Fig. 3: Screws at the center of the grille use a large washer
Fig. Fig. 4: Screws at the end of the grille are easily accessible ...
Fig. Fig. 5: ... and do not use a washer
Fig. Fig. 6: Once the screws have been removed, carefully lift the grille from the vehicle
Fig. Fig. 7: The grille is secured to the vehicle with several screws (arrows)
Remove the headlamp trim and parking lamps, as necessary.
Remove the grille mounting screws and the grille.
Position the grille in place and install the mounting screws.
Tighten the mounting screws to 4 inch lbs. (2 Nm).
Install the headlamp trim and parking lamps, as necessary.