Chrysler Full-Size Vans 1989-1998 Repair Guide

Chassis Greasing

Print

LUBRICATION



See Figures 1, 2, 3 and 4

Some components are permanently lubricated during manufacture and do not need periodic maintenance. These components can be identified by the lack of a grease fitting.

Inspect each component to be lubricated. Replace components with torn/ruptured ball joint seals. Damaged seals will eventually leak grease or allow contaminates to enter.



Click image to see an enlarged view

Fig. Fig. 1: Common chassis lubrication points



Click image to see an enlarged view

Fig. Fig. 2: View of the grease fittings for the front end on the left side; the right side is similar



Click image to see an enlarged view

Fig. Fig. 3: Make sure the grease fittings are clean before applying grease to them



Click image to see an enlarged view

Fig. Fig. 4: Make sure you have the grease gun completely seated on the grease fitting before you pump grease into it

 
label.common.footer.alt.autozoneLogo