Chrysler Neon 1995-1999 Repair Guide

Outside Mirrors

Print

REMOVAL & INSTALLATION



See Figures 1, 2, 3 and 4

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the door trim panel, as outlined later in this section.
  4.  
  5. Remove the side view mirror cover.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: Remove the side view mirror cover

  1. If equipped with power mirrors, perform the following:
    1. Remove the water shield.
    2.  
    3. Detach the electrical connector from the power mirror motor.
    4.  

  2.  
  3. Unfasten the bolts holding the mirror to the stanchion, then remove the mirror from the vehicle.
  4.  



Click image to see an enlarged view

Fig. Fig. 2: Unfasten the nuts securing the mirror to the stanchion ...



Click image to see an enlarged view

Fig. Fig. 3: ... then carefully remove the side view mirror from the door



Click image to see an enlarged view

Fig. Fig. 4: Exploded view of the side view mirror mounting

To install:
  1. Position the side view mirror on the vehicle, then install the nuts attaching the mirror to the stanchion.
  2.  
  3. If equipped with power mirrors, perform the following:
    1. Attach the electrical connector to the power window motor.
    2.  
    3. Install the water shield.
    4.  

  4.  
  5. Install the door trim panel, as outlined later in this section.
  6.  
  7. Install the side view mirror cover.
  8.  
  9. Connect the negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo