Chrysler Neon 1995-1999 Repair Guide

Fog/Driving Lights

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the fog lamp from behind the bumper fascia, as follows:
    1. Unfasten the bolt holding the fog lamp to the radiator closure panel.
    2.  
    3. Separate the fog lamp from the radiator closure panel.
    4.  
    5. Pull the fog lamp through the opening in the fascia.
    6.  
    7. Detach the electrical connector from the fog lamp bulb base.
    8.  
    9. Remove the fog lamp from the vehicle.
    10.  

  4.  
  5. Remove the bulb from the lamp.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: Once the fog lamp is removed from the bumper, you can remove the bulb

To install:
  1. Install the bulb in the lamp. Install the fog lamp in the vehicle.
  2.  
  3. Attach the electrical connector to the fog lamp bulb base.
  4.  
  5. Place the fog lamp through the opening in the fascia.
  6.  
  7. Position the fog lamp to the radiator closure panel.
  8.  
  9. Install the bolt holding the fog lamp to the radiator closure panel.
  10.  
  11. Connect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo