Honda CRV/Odyssey 1995-2000 Repair Information

Flashers

Print

REPLACEMENT Turn Signal Flasher/Hazard Warning Relay



  1. Grasp and pull the flasher from the connector located near the top of the fuse panel.
  2.  
  3. Inspect the socket for corrosion or any other signs of a bad contact.
  4.  

To install:
  1. Install a new flasher in the connector.
  2.  
  3. Install the fuse panel cover.
  4.  

See Figures 1 through 6

Click image to see an enlarged view

Fig. Fig. 1: The interior fuse panel on CRV models is located in the driver's side lower dash area



Click image to see an enlarged view

Fig. Fig. 2: The under hood fuse panel and typical ABS fuse panel found on CRV models



Click image to see an enlarged view

Fig. Fig. 3: The interior fuse panel on 2.2L/2.3L Odyssey models



Click image to see an enlarged view

Fig. Fig. 4: The underhood fuse panel on 2.2L/2.3L Odyssey models



Click image to see an enlarged view

Fig. Fig. 5: The interior fuse panel on V6 Odyssey models



Click image to see an enlarged view

Fig. Fig. 6: The underhood fuse panel on V6 Odyssey models

 
label.common.footer.alt.autozoneLogo