Cobalt 2006-2008, G5 2007

Removal & Installation

Imprimir

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Set the front wheels in the straight-ahead position.
  4.  
  5. Disable the SIR system. Refer to Air Bag (Supplemental Restraint System), disarming the system.

    Click image to see an enlarged view

    Fig. Remove the steering wheel SIR module

  6.  
  7. Remove the steering wheel SIR module:
    1. Insert a small blunt-ended punch, or equivalent, through the access opening on the left of the steering wheel.
    2.  
    3. Push the spring fastener inward through the access hole. Repeat for the opening on the right side of the steering wheel.
    4.  
    5. Remove the Connector Position Assurance (CPA) retainer.
    6.  
    7. Disconnect the electrical connectors.
    8.  
    9. Carefully remove the steering wheel SIR module.

      Click image to see an enlarged view

      Fig. Remove the Instrument Panel (I/P) center trim panel by releasing the retaining fasteners

    10.  

  8.  
  9. Remove the Instrument Panel (I/P) center trim panel (1) by pulling out on the trim panel in order to release the retaining fasteners (2).
  10.  
  11. Disconnect the electrical connectors on the Instrument Panel (I/P) center trim panel (1).

    Click image to see an enlarged view

    Fig. Remove the steering column opening filler assembly, with clip, & bumper

  12.  
  13. Remove the steering column opening filler assembly (1) by pulling away the clips (2).
  14.  
  15. Disconnect the electrical connector for the trunk release.

    Click image to see an enlarged view

    Fig. Remove the Instrument Panel (I/P) left side trim panel

  16.  
  17. Remove the Instrument Panel (I/P) left side trim panel (1).
  18.  
  19. Tilt the steering wheel up.
  20.  
  21. Disconnect the I/P dimmer switch and, if equipped, the fog lamp switch.