Continental 2000-2002

Removal & Installation

Print

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the instrument panel insulator, as follows:
    1. Remove the pushpins.
    2.  
    3. Disconnect the courtesy light and remove the instrument panel insulator.

      Click image to see an enlarged view

      Fig. Remove the pushpins (1), then detach the courtesy lamp and remove the instrument panel insulator (2)

    4.  

  4.  
  5. Remove the floor console, as follows:
    1. If equipped, disconnect the cellular phone antenna cable and coaxial cable.
    2.  
    3. Remove the console glove compartment.
    4.  
    5. Disconnect the power point electrical connector.
    6.  
    7. If equipped, disconnect the cellular phone antenna cable and coaxial cable from the console glove compartment.
    8.  
    9. If equipped, remove the compact disc changer screws, electrical connector, then remove the digital audio compact disc player.
    10.  
    11. Place the gearshift lever in the 1 position.
    12.  
    13. Remove the console top panel. Disconnect the cigar lighter electrical connector.
    14.  
    15. Remove the floor console to floor bracket screws.
    16.  
    17. Remove the floor console to gearshift bracket screws.
    18.  
    19. Remove the floor console by sliding the floor console rearward. Disconnect the three electrical connectors.
    20.  

  6.  
  7. Remove the screws and remove the cover.

    Click image to see an enlarged view

    Fig. Remove the screws and remove the cover

  8.  
  9. Remove the A/C electronic door actuator motor:
    1. Disconnect the connector.
    2.  
    3. Remove the screws and remove the A/C electronic door actuator motor.

      Click image to see an enlarged view

      Fig. Removing the electronic blend door actuator motor

    4.  

  10.  
  11. Installation is the reverse of the removal procedure.
  12.  

 
label.common.footer.alt.autozoneLogo