Continental 2000-2002

How To Use PID Data

Print

PID is an acronym for Parameter Identification Data. It is used to identify PCM related items on both OEM and aftermarket Scan Tools. The PID Data or data stream items available for display include:



PCM analog & digital input signals (ACT, ECT, IAT, MAP, TP)
 
PCM analog & digital output signals (EVR, FUELPW1, MIL)
 
PCM calculated values (VACUUM, LOAD, MISF, SPARK)
 
PCM system status information (OBD II I/M Readiness Status)
 

To view PID Data on a Scan Tool, connect the Scan Tool to the vehicle connector; then identify the vehicle by following the setup instructions, and select Data Stream or Parameter from the menu.


NOTE
If a Scan Tool does not power up or read PID Data, verify that the power, ground and tool cable connections are all okay. To test if the tool is working properly, try it on another vehicle.

Information contained within the PID Data Charts can be used to:



Validate a repair procedure
 
Check the operation of a component before or after a repair
 
Check the operation of a component or system by viewing "live" data from the vehicle computer data stream
 

This Section can be used to look up PID Data so that you can compare the "known good" values to the actual values you see on the Scan Tool display. To locate the PID Data, find the model, correct engine size (with VIN Code) and finally the year of the vehicle.

For example, to look up the PID Data for a 1999 Taurus 3.0L VIN U, go to Contents Page 2 and find the text string shown below:

This section of the contains Parameter ID (PID) tables for Lincoln Continental vehicles from 2000-02. It can be used to assist in the repair of both Code & No Code problems.

 
label.common.footer.alt.autozoneLogo