Continental 2000-2002

Solenoid or Relay

Print

  1. Disconnect the negative battery cable.
  2.  
  3. Label and disconnect the wires from the relay.
  4.  
  5. Remove the relay retaining bolts and remove the relay.
  6.  
  7. Installation is the reverse of the removal procedure.
  8.  

Removal & Installation



Starter Mounted
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the starter.
  4.  
  5. Remove the positive brush connector from the solenoid M terminal.
  6.  
  7. Remove the solenoid retaining screws and remove the solenoid.
  8.  
  9. Attach the solenoid plunger rod to the slot in the lever and tighten the solenoid retaining screws to 45-54 inch lbs. (5-6 Nm).
  10.  
  11. Attach the positive brush connector to the solenoid M terminal and tighten the retaining nut to 80-120 inch lbs. (9-14 Nm).
  12.  
  13. Install the starter and connect the negative battery terminal.
  14.  

 
label.common.footer.alt.autozoneLogo