Contour, Contour SVT, Mystique 2000
Wheel Speed Sensors
Removal & Installation
Raise and safely support the vehicle.
Remove the sensor retaining bolt and sensor from the front wheel knuckle.
Disconnect the sensor wire from the strut bracket.
Unplug the sensor connector.
Remove the sensor wires from the routing clips.
Remove the screw for the fender trim and gently bend the trim back to access the connector.
Unplug the connector and remove the sensor.
Fig. Remove the sensor retaining screw . . .
Fig. . . . and remove the sensor from the knuckle
Fig. The sensor wire is retained to the strut by two clips
Fig. The sensor wire is routed using the clips located here