Corolla 2006-2007

Idle Air Control Valve

Print

Removal & Installation



Specific to:

Toyota Corolla 2006-2008

  1. Remove idle air control connector.
  2.  
  3. Remove idle air control of assembly from a throttle valve assembly.
  4.  

To install:

  1. To install, reverse removal procedure.
  2.  

Testing



Specific to:

Toyota Corolla 2006-2008

  1. Check electrical connections at idle air control valve.
  2.  
  3. Check for vacuum leaks at idle air control valve to throttle valve assembly.
  4.  
  5. Remove idle air control valve and check for carbon buildup between valve and throttle valve assembly. Clean as necessary.
    NOTE
    Proper testing of Idle Air Control requires active tasks of Idle Air Control system by an Intelligent tester scan tool. Without proper tester, accurate testing of Idle Air Control system testing is not possible.

  6.  

 
label.common.footer.alt.autozoneLogo