Corolla 2006-2007

Removal & Installation

Print

  1. Remove the bolt and disconnect the air conditioning tube assembly from the with receiver condenser assembly.
  2.  
  3. Remove the O-ring from the air conditioning tube assembly.
    NOTE
    Seal the opening of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.

  4.  
  5. Remove the bolt and discharge hose sub-assembly from the receiver condenser assembly.

    Click image to see an enlarged view

    Fig. Removing discharge hose

  6.  
  7. Remove the O-ring from the discharge hose sub-assembly.
    NOTE
    Seal the opening of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.

  8.  
  9. Remove the 2 bolts and 2 radiator upper supports.

    Click image to see an enlarged view

    Fig. Removing radiator upper support

  10.  
  11. Remove the 2 bolts.
  12.  
  13. Slide the upper part of the radiator assembly rearward to remove the with receiver condenser assembly.

    Click image to see an enlarged view

    Fig. Removing receiver condenser assembly

  14.  

To install:

  1. Install the with receiver condenser assembly with the 2 bolts.
  2.  
  3. Install the 2 radiator upper supports with the 2 bolts.
  4.  
  5. Install discharge hose sub assembly.
    1. Remove the attached vinyl tape from the hose and connecting part of the condenser assembly.
    2.  
    3. Sufficiently apply compressor oil to the new O-ring and hose joint.
    4.  
    5. Install an O-ring to the discharge hose sub-assembly.
    6.  
    7. Install the discharge hose sub-assembly to the condenser assembly with the bolt.
    8.  

  6.  
  7. Install air conditioning tube assembly.
    1. Remove the attached vinyl tape from the pipe and connecting part of the condenser assembly.
    2.  
    3. Sufficiently apply compressor oil to the new O-ring and pipe joint.
    4.  
    5. Install an O-ring to the air conditioning tube assembly.
    6.  
    7. Install the air conditioning tube assembly to the condenser assembly with the bolt.
    8.  

  8.  
  9. Charge refrigerant.
  10.  
  11. Warm up engine.
  12.  
  13. Inspect for leakage.
  14.  

 
label.common.footer.alt.autozoneLogo