Removal & Installation
- Before servicing the vehicle, refer to the Precautions section.
- Drain the engine oil.
Remove or disconnect the following:
Negative battery cable. On vehicles equipped with an air bag, wait at least 90 seconds before proceeding.
- Remove any old sealant from the oil pan flange and thoroughly clean the sealing surface.
Install or connect the following:
Oil pan. Tighten the bolts and nuts in several passes. Bolts and nuts: 80 inch lbs. (9 Nm).
- Fill the engine with clean oil.
Start the vehicle, check for leaks and repair if necessary.