Corolla 2006-2007

Removal & Installation

Print

Specific to:

Toyota Corolla 2006-2008

  1. Disconnect the pressure tube from the power steering pump.
  2.  
  3. Loosen the drive belt.
  4.  
  5. Remove the retaining bolts.

    Click image to see an enlarged view

    Fig. Removal and installation of the power steering pump

  6.  

To install:

  1. Replace the retaining bolts and torque them to 26 ft. lbs.(35 Nm).
  2.  
  3. Adjust the drive belt tension.
  4.  
  5. Connect the pressure tube to the power steering pump.
  6.  
  7. Bleed the system.
  8.  

 
label.common.footer.alt.autozoneLogo