Corolla 2006-2007

Wheel Bearings

Print

Adjustment



Specific to:

Toyota Corolla 2006-2008


NOTE
The wheel bearing is non-adjustable. If the wheel bearing is out of specifications, replace the wheel bearing.

Removal & Installation



Specific to:

Toyota Corolla 2006-2008



Click image to see an enlarged view

Fig. Exploded view of the hub and wheel bearing assembly-

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable. On vehicles equipped with an air bag, wait at least 90 seconds before proceeding
     
    Wheel
     
    Brake drum or rotor
     
    With ABS brakes, ABS wheel speed sensor
     
    Hub
     
    O-ring from the backing plate
     

  4.  

To install:

  1. Install or connect the following:

    New O-ring onto the backing plate. Coat the O-ring with multipurpose grease
     
    Hub to the knuckle. Bolts: Except (80 Nm)
     
    With ABS brakes, ABS wheel speed sensor
     
    Brake drum or rotor
     
    Wheel
     
    Negative battery cable
     

  2.  
  3. Check and adjust the alignment, if needed.
  4.  

 
label.common.footer.alt.autozoneLogo