Corolla 2006-2007

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Right-hand engine under cover
     
    Drive belt
     
    Water pump
     

  6.  

To install:

  1. Install or connect the following:

    Water pump. Bolts marked A (short): 80 inch lbs. (9 Nm). Bolts marked B (long): 96 inch lbs. (11 Nm).

    Click image to see an enlarged view

    Fig. Water pump bolt identification-1.8L (1ZZ-FE) engine

     
    Drive belt
     
    Right engine under cover
     
    Negative battery cable
     

  2.  
  3. Fill the cooling system to the proper level.
  4.  
  5. Start the vehicle, check for leaks and repair if necessary.
  6.  

2zz-Ge And 2zz-FE Engines



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Right-hand engine under cover
     
    Drive belt
     
    Water pump pulley
     
    Water pump and O-ring
     

  6.  

To install:

  1. Install or connect the following:

    Water pump with new O-ring. Bolts: 80 inch lbs. (9 Nm).
     
    Water pump pulley. Bolts: 11 ft. lbs. (15 Nm).
     
    Drive belt
     
    Right engine under cover
     
    Negative battery cable
     

  2.  
  3. Fill the cooling system to the proper level.
  4.  
  5. Start the vehicle, check for leaks and repair if necessary.
  6.  

 
label.common.footer.alt.autozoneLogo