Corvette 1997-2005

Ignition Control Module

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the fuel rail cover.
  4.  
  5. Disconnect the ignition coil harness connector.
  6.  
  7. Disconnect the spark plug wire at the ignition coil.
  8.  
  9. Remove the ignition coil mounting bolts.
  10.  
  11. Remove the ignition coil.

    Click image to see an enlarged view

    Fig. Removing the ignition coil assembly on Corvette 5.7L & 6.0L V8 engines

  12.  

To install:

  1. Install the ignition coil.
  2.  
  3. Install the ignition coil mounting bolts. Tighten the ignition coil mounting bolts to 12 Nm (106 inch lbs.).
  4.  
  5. Connect the spark plug wire at the ignition coil.
  6.  
  7. Connect the ignition coil harness connector. Tighten the harness bolt to 12 Nm (106 inch lbs.).
  8.  
  9. Install the fuel rail cover.
  10.  
  11. Connect the negative battery cable.
  12.  
  13. Program the transmitters.
  14.  

 
label.common.footer.alt.autozoneLogo