Corvette 1997-2005

Stabilizer Bar (Sway Bar) & Links

Print

Removal & Installation



  1. Raise and support the vehicle.
  2.  
  3. Remove the tire and wheel assemblies.
  4.  
  5. Using a back-up wrench to prevent the link stud from rotating, remove the stabilizer shaft link nuts from the stabilizer shaft.
  6.  
  7. Remove the stabilizer shaft clamps, bolts and nuts retaining the shaft to the crossmember.
  8.  
  9. Remove the stabilizer shaft from the vehicle.
  10.  

To install:

  1. Install the stabilizer shaft to the vehicle.
  2.  
  3. Install the stabilizer shaft insulator clamps to the stabilizer shaft and the crossmember.
  4.  
  5. Tighten the stabilizer shaft insulator clamp bolts to 74 ft. lbs. (100 Nm).
  6.  
  7. Tighten the stabilizer shaft insulator clamp nuts to 70 ft. lbs. (95 Nm).
  8.  
  9. Using a back-up wrench to prevent the link stud from rotating, install the stabilizer shaft links to the stabilizer shaft.
  10.  
  11. Tighten the stabilizer shaft link nuts to 56 ft. lbs. (76 Nm).
  12.  
  13. Install the tire and wheel assemblies.
  14.  
  15. Lower the vehicle.
  16.  

 
label.common.footer.alt.autozoneLogo