Corvette 2005-2008

Removal & Installation

Print


CAUTION
Before beginning this procedure, refer to the precautions at the beginning of this section. Only a MVAC-trained, EPA-certified, automotive technician should service the A/C system or its components.

  1. Remove the HVAC module.
  2.  
  3. Remove the heater core.
  4.  
  5. Remove the HVAC module case retaining screws.
  6.  
  7. Separate the HVAC module upper case from the HVAC module lower case.
  8.  
  9. Lift up on the air temperature doors to disconnect from one another.
  10.  
  11. Remove the right and/or left air temperature door from the HVAC module.
  12.  

To install:

  1. Install the right and/or left air temperature door to the HVAC module.
  2.  
  3. Lift up on the air temperature doors to connect to one another.
  4.  
  5. Install the HVAC module upper case to the HVAC module lower case.
  6.  
  7. Install the HVAC module case retaining screws and tighten to 14 inch lbs. (1.6 Nm).
  8.  
  9. Install the heater core.
  10.  
  11. Install the HVAC module.
  12.  

 
label.common.footer.alt.autozoneLogo